 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FMMT596 SOT 23 PNP silicon planar high voltage transistor Ordering information Device FMMT596TA Reel size (inches 7 Tape width (mm) 8 Quantity per reel 3,000 Device marking 596 C C E B B E Pinout - top view Absolute maximum ratings Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Peak pulse current Continuous collector current Base current Power dissipation at Tamb=25C Operating and storage temperature range Symbol VCBO VCEO VEBO ICM IC IB Ptot Tj:Tstg Value -220 -200 -5 -1 -0.3 -200 500 -55 to +150 Unit V V V A A mA mW C Issue 4 - July 2007 (c) Zetex Semiconductors plc 2007 1 www.zetex.com FMMT596 Electrical characteristics (Tamb = 25C) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cut-off current Emitter cut-off current Collector-emitter cut-off current Collector-emitter saturation voltage Symbol V(BR)CBO V(BR)CEO V(BR)EBO ICBO IEBO ICES VCE(sat) Min. -220 -200 -5 -100 -100 -100 -0.2 -0.35 Typ. Max. Unit Conditions V V V nA nA nA V V IC=-100 A IC=-10mA (*) IE=-100 A VCB=-200V VEB=-4V VCES=-200V IC=-100mA, IB=-10mA, IB=-250mA, IB=-25mA(*) Base-emitter saturation voltage Base-emitter turn-on voltage Static forward current transfer ratio VBE(sat) VBE(on) hFE 100 100 85 35 Transition frequency Output capacitance Switching times fT Cobo td tr ts tf Switching times td tr ts tf 22 19 472 70 44 31 665 76 2%. -1.0 -0.9 V V IC=-250mA, IB=-25mA(*) IC=-250mA, VCE=-10V(*) IC=-1mA, VCE=-10V IC=-100mA, VCE=-10V(*) 300 IC=-250mA, VCE=-10V(*) IC=-400mA, VCE=-10V(*) MHz IC=-50mA, VCE=-10V, f=100MHz 150 10 pF ns VCB=-10V, f=1MHz IC=-200mA, VCC=-80V Ib1=Ib2=-20mA ns IC=-100mA, VCC=-80V Ib1=Ib2=-10mA NOTES: (*) Measured under pulsed conditions. Pulse width = 300 s. Duty cycle Issue 4 - July 2007 (c) Zetex Semiconductors plc 2007 2 www.zetex.com FMMT596 Typucal characteristics 0.4 0.3 0.2 0.1 0 0.4 IC/IB=10 +25C IC/IB=10 IC/IB=50 VCE(sat)- (V) VCE(sat)- (V) 0.3 0.2 0.1 0 -55C +25C +100C 1mA 10mA 100mA IC-collector current VCE(sat) v IC VCE=10V 1A 1mA 10mA 100mA IC-collector current VCE(sat) v IC 1mA 320 +100C 1.0 0.8 IC/IB=10 hFE - typical gain +25C VBE(sat)- (V) 240 160 -55C 0.6 0.4 0.2 -55C +25C +100C 80 0 1mA 10mA 100mA IC-collector current hFE v IC 1A 0 1mA 10mA 100mA IC-collector current VBE(sat) v IC 1mA VBE(on)- (V) 0.8 0.6 0.4 0.2 0 1mA -55C +25C +100C IC-collector current (A) 1.0 VCE=10V 1 0.1 DC 1s 100ms 1ms 100 s 0.01 10mA 100mA IC-collector current VBE(on) v IC 1A 0.001 0.1V 1V 10V 100V 1000V VCE-collector emitter voltage (V) Safe operating area Issue 4 - July 2007 (c) Zetex Semiconductors plc 2007 3 www.zetex.com FMMT596 Package outline - SOT23 E e b 3 leads e1 L1 E1 D A A1 L c Dim. A A1 b c D e Millimeters Min. 0.01 0.30 0.085 2.80 Max. 1.12 0.10 0.50 0.20 3.04 - Inches Min. 0.0004 0.012 0.003 0.110 Max. 0.044 0.004 0.020 0.008 0.120 Dim. e1 E E1 L L1 - Millimeters Min. 2.10 1.20 0.25 0.45 Max. 2.64 1.40 0.60 0.62 1.90 NOM Inches Min. 0.083 0.047 0.0098 0.018 Max. 0.104 0.055 0.0236 0.024 0.075 NOM 0.95 NOM 0.037 NOM Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches Issue 4 - July 2007 (c) Zetex Semiconductors plc 2007 4 www.zetex.com FMMT596 Intentionally left blank Issue 4 - July 2007 (c) Zetex Semiconductors plc 2007 5 www.zetex.com FMMT596 Definitions Product change Zetex Semiconductors reserves the right to alter, without notice, specifications, design, price or conditions of supply of any product or service. Customers are solely responsible for obtaining the latest relevant information before placing orders. Applications disclaimer The circuits in this design/application note are offered as design ideas. It is the responsibility of the user to ensure that the circuit is fit for the user's application and meets with the user's requirements. No representation or warranty is given and no liability whatsoever is assumed by Zetex with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights arising from such use or otherwise. Zetex does not assume any legal responsibility or will not be held legally liable (whether in contract, tort (including negligence), breach of statutory duty, restriction or otherwise) for any damages, loss of profit, business, contract, opportunity or consequential loss in the use of these circuit applications, under any circumstances. Life support Zetex products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Zetex Semiconductors plc. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Reproduction The product specifications contained in this publication are issued to provide outline information only which (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned. Terms and Conditions All products are sold subjects to Zetex' terms and conditions of sale, and this disclaimer (save in the event of a conflict between the two when the terms of the contract shall prevail) according to region, supplied at the time of order acknowledgement. For the latest information on technology, delivery terms and conditions and prices, please contact your nearest Zetex sales office. Quality of product Zetex is an ISO 9001 and TS16949 certified semiconductor manufacturer. To ensure quality of service and products we strongly advise the purchase of parts directly from Zetex Semiconductors or one of our regionally authorized distributors. For a complete listing of authorized distributors please visit: www.zetex.com/salesnetwork Zetex Semiconductors does not warrant or accept any liability whatsoever in respect of any parts purchased through unauthorized sales channels. ESD (Electrostatic discharge) Semiconductor devices are susceptible to damage by ESD. Suitable precautions should be taken when handling and transporting devices. The possible damage to devices depends on the circumstances of the handling and transporting, and the nature of the device. The extent of damage can vary from immediate functional or parametric malfunction to degradation of function or performance in use over time. Devices suspected of being affected should be replaced. Green compliance Zetex Semiconductors is committed to environmental excellence in all aspects of its operations which includes meeting or exceeding regulatory requirements with respect to the use of hazardous substances. Numerous successful programs have been implemented to reduce the use of hazardous substances and/or emissions. All Zetex components are compliant with the RoHS directive, and through this it is supporting its customers in their compliance with WEEE and ELV directives. Product status key: "Preview" Future device intended for production at some point. Samples may be available "Active" Product status recommended for new designs "Last time buy (LTB)" Device will be discontinued and last time buy period and delivery is in effect "Not recommended for new designs" Device is still in production to support existing designs and production "Obsolete" Production has been discontinued Datasheet status key: "Draft version" This term denotes a very early datasheet version and contains highly provisional information, which may change in any manner without notice. "Provisional version" This term denotes a pre-release datasheet. It provides a clear indication of anticipated performance. However, changes to the test conditions and specifications may occur, at any time and without notice. "Issue" This term denotes an issued datasheet containing finalized specifications. However, changes to specifications may occur, at any time and without notice. Zetex sales offices Europe Zetex GmbH Kustermann-park Balanstrae 59 D-81541 Munchen Germany Telefon: (49) 89 45 49 49 0 Fax: (49) 89 45 49 49 49 europe.sales@zetex.com Americas Zetex Inc 700 Veterans Memorial Highway Hauppauge, NY 11788 USA Telephone: (1) 631 360 2222 Fax: (1) 631 360 8222 usa.sales@zetex.com Asia Pacific Zetex (Asia Ltd) 3701-04 Metroplaza Tower 1 Hing Fong Road, Kwai Fong Hong Kong Telephone: (852) 26100 611 Fax: (852) 24250 494 asia.sales@zetex.com Corporate Headquarters Zetex Semiconductors plc Zetex Technology Park, Chadderton Oldham, OL9 9LL United Kingdom Telephone: (44) 161 622 4444 Fax: (44) 161 622 4446 hq@zetex.com (c) 2007 Published by Zetex Semiconductors plc Issue 4 - July 2007 (c) Zetex Semiconductors plc 2007 6 www.zetex.com |
Price & Availability of FMMT596
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |